Introduction:(NP302-Drivers,NP302series-QuickInstallationGuide)
NP302 series can conveniently connect up to 2 serial devices to an
Ethernet, allowing you to network your existing serial devices with
only basic configuration. With NP302 series, you can both
centralize the management of your serial devices, and distribute
management hosts over the network.
NP302 series can be used to connect different devices for remote
management, each serial port operates independently to provide
maximum versatility, each port can be operate in Driver, TCP
Server, and TCP Client mode independently.
Features:
1. Adopt 32 bit ARM processor, 125 DMIPS manage ability
2. 2 serial ports, with support for RS-232/RS-485/RS-422
3. Support 10/100M Ethernet
4. Support 300bps-460.8Kbps
5. Support TCP, UDP, ARP, ICMP, HTTP, TELNET and DHCP protocol
6. Support across gateway, router communication
7. Support standard TCP/IP SOCKET
8. Support Virtual serial driver access and auto connect after the
network disconnect
9. Choice of configuration methods: Windows, TELNET and WEB
10. Support DIN-Rail or wall mounting installation
Specifications:
Ethernet
Number of ports:1
Standard:10/100Base-T(X)
Speed:10/100M auto-sensing
Working mode: half /full duplex
Working: TCP Server, TCP Client, UDP and Real COM driver
Memory: Most 32Kbyte
Transmission: 100m
Electromagnetism isolate: 1KV
Connector: RJ45
Serial
Standard: RS-232/RS-485/RS-422
Number of ports: 2
Signals: RS-232:DCD,RXD,TXD,DTR,GND,DSR,RTS,CTS
RS-485:Data+,Data-,GND
RS-422:TXD+,TXD-,RXD+,RXD-,GND
Parity: None, Even, Odd, Space, Mark
Data bits: 5bit, 6bit, 7bit, 8bit
Stop bits: 1, 1.5, 2
Baud rate: 300bps ~ 460.8Kbps
Flow control: RTS/CTS or XON/XOFF
Direction control: RS485 side adopt ADDC technology, auto text and
control data transfer direction
Loading: RS-485/422 side support 32 nodes (customize 128 nodes)
loopback
Transmission: RS-485/422 side 1200M,
RS-232 port 15M
Interface protection：1500W surge protection,
15KV ESD protection
Software
Network protocols: Support TCP, UDP, ARP, ICMP, HTTP, TELNET and
DHCP
Driver support: Windows Real COM driver(Windows NT/2000, Windows
XP/2003)
Configuration options: Windows, TELNET and WEB
Power
Power input: 5VDC
Consumption: <1W
Environment
Working temperature:-20°C～60°C
Storage temperature:-25°C～85°C
Humidity: Relative humidity 5% to 95%
Appearance
Color: Black
L×W×H: 113.0mm×77.0mm×23.5mm
Material: Iron (Shell)
Weight: 240g
Warranty: 5 years
Approvals: FCC, CE, RoHS approvals
Ordering Information:
NP302 2-port
RS232 to Ethernet(10M/100M), DC5V, wall mounting
NP302-M (1 port RS232+1 port RS485/422) to
Ethernet(10/100M), DC5V, wall mounting
NP302-2M 2-port RS485/422 to
Ethernet(10M/100M), DC5V, wall mounting |
